Home › Guides › Solar System Maintenance and Monitoring

Guide

Solar System Maintenance and Monitoring

Solar has no moving parts to speak of, so maintenance is light. A little attention catches the problems that do happen.

Watch production

Open the monitoring app now and then. A sudden drop on a sunny day, or one panel reading far below the others, is worth a call. Keep a note of your normal summer and winter output so you know what is typical.

Keep panels clean enough

Rain washes off some dust. Pollen, bird droppings, ash, salt near the coast and dust in dry regions can build up. If production falls without a change in weather, dirt is a common cause. Clean from the ground with a soft brush and plain water, or hire someone who works on roofs safely. Avoid harsh chemicals and pressure washers.

Trim what grows

A tree that was small when the system went in can shade the roof a few years later. Trimming it can restore production.

Check the parts that wear

  • Inverter: the most common point of failure over the life of the system. Know where it is and what its status light means.
  • Wiring and mounts: animals nesting under panels can chew wires, and mesh guards can keep them out.
  • After storms: look for cracked panels or loose parts from the ground.

When to call

Call the installer if the inverter shows an error, if monitoring has gone offline for days, or if you see damage. Keep your contract and equipment list handy, since coverage depends on the terms you signed.

Keep reading

General information, not financial, tax or engineering advice. Last reviewed November 19, 2026.

Ready to talk to an installer?

If you own your home and are thinking about solar for your home, one call connects you with an available independent provider for a quote. No obligation.

Call Energy Bros USA(855) 235-1977
Talk to an independent solar provider · (855) 235-1977